Zipper jacket sewing pattern model 44705 (Product code: 44705)

Recommended fabrics for this pattern: faux leather.

You will also need: fusible interfacing; 1 separating zipper; lining fabric; snap button.

Add seam allowances to the pattern: all seams 1 cm. Sleeve hem allowance – 4 cm.

CUTTING:

Main fabric:

1. Stand collar – 1 piece

2. Back – 2 pieces

3. Back yoke 1 – 2 pieces

4. Back yoke 2 – 2 pieces

5. Back yoke 3 – 2 pieces

6. Front – 2 pieces

7. Front yoke 1 – 2 pieces

8. Front yoke 2 – 2 pieces

9. Front yoke 3 – 2 pieces

10. Back waistband – 2 pieces

11. Front waistband – 4 pieces

12. Upper sleeve – 2 pieces

13. Lower sleeve – 2 pieces

14. Front facing – 2 pieces

15. Back neckline facing – 1 piece

Lining fabric:

1. Back – 2 pieces

2. Front – 2 pieces

5. Upper sleeve – 2 pieces

6. Lower sleeve – 2 pieces

Fusible interfacing: front facing, back waistband, front waistband, stand collar.

Attention: before fusing details from faux leather, test on a scrap piece.

1. Fuse with interfacing: front facing, stand collar, back waistband, front waistband.

2. Stitch bust darts on the front. Trim dart depths, press down and topstitch.

3. Attach front yoke 1 to front yoke 2, topstitch seam allowances onto yoke 1. Attach front yoke 3 to yoke 2, topstitch allowances onto yoke 2. Join assembled yoke to front, topstitch allowances onto yoke.

4. Attach back yoke 1 to back yoke 2, topstitch allowances onto yoke 1. Attach back yoke 3 to yoke 2, topstitch allowances onto yoke 2. Join assembled yoke to back, topstitch allowances. Sew center back seam, press allowances to left and topstitch.

5. Mark zipper placement on patch pockets. Cut slit along markings, make diagonal cuts 1–1.5 cm from ends. Turn allowances to wrong side, place zipper underneath so teeth show, stitch around 0.2 cm from edge. Turn pocket edges to wrong side and topstitch onto fronts and left sleeve.

6. Sew shoulder and side seams. Press and fuse seams.

7. Join front waistband pieces to back. Press and fuse seams. Attach outer waistband to jacket hem, press down allowances and topstitch.

8. Place fronts right sides together, align edges, measure length. Attach zipper to front edge.

9. Fold stand collar in half right sides together. Stitch short and shaped edge to first notch. Clip corners, turn right side out, edge‑stitch.

10. Baste collar into neckline.

11. Sew elbow seam of sleeve. Press allowances to upper sleeve and topstitch. Press hem. Sew front seam, folding hem allowance. Set sleeves into armholes, press allowances onto jacket and topstitch.

12. Sew and press shoulder seams of facing and neckline facing. On lining pieces, sew seams and set sleeves, leaving opening. Press allowances. Attach lining to facings. Attach inner waistband.

13. Place lining and jacket right sides together, pin, stitch hem, front edge and collar. Sew lining to sleeve hem. Turn jacket through sleeve opening. Close opening. Edge‑stitch along zipper and hem. Divide lower waistband into three sections and topstitch.

14. Set snap button on collar.