Raglan jacket sewing pattern model 44704 (Product code: 44704)

Recommended fabrics for this pattern: faux leather.

You will also need: fusible interfacing; 1 separating zipper; lining fabric; fur for collar and cuffs; 8 snaps; 4 decorative rings.

Add seam allowances to the pattern: all seams 1 cm. Hem allowance – 4 cm.

Cut:

Main fabric:

1. Back – 2 pieces

2. Front yoke – 2 pieces

3. Lower front – 2 pieces

4. Back sleeve – 2 pieces

5. Front sleeve – 2 pieces

6. Cuff – 2 pieces

7. Facing – 2 pieces

8. Under collar – 1 piece

9. Back neckline facing – 1 piece

10. Belt 1 left – 2 pieces

11. Belt 2 left – 2 pieces

12. Belt 3 left – 2 pieces

13. Belt 4 left – 2 pieces

14. Belt 1 right – 2 pieces

15. Belt 2 right – 2 pieces

16. Belt 3 right – 2 pieces

17. Belt 4 right – 2 pieces

Fur:

1. Upper collar – 1 piece

2. Cuff – 2 pieces

Lining fabric:

1. Back – 2 pieces

2. Front yoke – 2 pieces

3. Lower front – 2 pieces

4. Back sleeve – 2 pieces

5. Front sleeve – 2 pieces

Fusible: facing, back neckline facing.

Note: Back, front yoke, and lower front pieces are cut without the width of the back neckline facing and facing respectively.

When stitching pieces, pay attention to notches — they must match!

Note: before fusing pieces of faux leather, test on a scrap.

Work description:

1. Fuse interfacing to facings and back neckline facing.

2. Stitch front yoke to lower front. Press seam allowances toward yoke and fuse.

3. Place fronts right sides together, align edges, match yokes, measure front length. Attach zipper to front edge.

4. Sew straps right sides together along three edges. Trim seams, turn right side out, topstitch around. Attach snaps to ends. Place straps on fronts as marked, adjust length, mark lower snaps, install them, and stitch straps to fronts.

5. Sew center back seam. Press allowances to left and topstitch. Attach back sleeves to back, front sleeves to fronts.

6. Sew sleeve upper seams. Press allowances open and topstitch. Attach cuff to sleeve right sides together. Press seam toward cuff and fuse. Sew sleeve underseams and side seams in one step.

7. Sew collar pieces right sides together along ends and outer edge. Turn right side out. Baste collar into neckline.

8. Sew fur cuff into a ring, join with lower cuff right sides together, stitch lower edge. Turn right side out.

9. Sew and press shoulder seams of facing and neckline facing. Join facing to front right sides together, stitch lower corner, front edge, and insert collar. Trim seams at corners. Turn fronts right side out, press seams. Topstitch along zipper.

10. Sew lining seams and insert sleeves, leaving an opening in right front sleeve seam. Press allowances. Attach lining to inner edges of facings and neckline facing.

11. Mark and press hem. Sew lining to sleeve and garment hem. Turn jacket right side out through sleeve opening. Close sleeve opening.

12. Thread straps on left front through fasteners and close snaps.